Panasonic TH-42PH11MK - Specifications; Power and Display Specifications; Connection Terminals and Accessories

47
Speci cations
TH-42PH11MK/S TH-50PH11MK/S
Power Source 220 - 240 V AC, 50/60 Hz
Power Consumption
Power on 345 W 425 W
Stand-by condition Save off 1.8 W, Save on 0.9 W Save off 1.5 W, Save on 0.7 W
Power off condition 0.5 W 0.3 W
Plasma Display panel Drive method : AC type
42-inch, 16:9 aspect ratio
Drive method : AC type
50-inch, 16:9 aspect ratio
Screen size 922 mm (W) × 518 mm (H)
× 1,057 mm (diagonal)
1,106 mm (W) × 622 mm (H)
× 1,269 mm (diagonal)
(No.of pixels) 786,432 (1,024 (W) × 768 (H))
[3,072 × 768 dots]
1,049,088 (1,366 (W) × 768 (H))
[4,098 × 768 dots]
Operating condition
Temperature 0 °C - 40 °C
Humidity 20 % - 80 %
Applicable signals
Colour System NTSC, PAL, PAL60, SECAM, Modi ed NTSC
Scanning format 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 60p · 50i ·
50p · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i
PC signals VGA, SVGA, XGA
SXGA, UXGA ···· (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
AV IN VIDEO IN (BNC)
S VIDEO IN (MINI DIN 4PIN)
AUDIO IN (RCA PIN JACK × 4)
1.0 Vp-p (75 )
Y: 1.0 Vp-p (75 ), C: 0.286 Vp-p (75 )
0.5 Vrms
PC IN (HIGH-DENSITY MINI D-SUB 15PIN)
B/P
B/CB:
R/P
R/CR:
HD/VD:
AUDIO IN (M3 JACK)
Y or G with sync 1.0 Vp-p (75 )
Y or G without sync 0.7 Vp-p (75 )
0.7 Vp-p (75 )
0.7 Vp-p (75 )
1.0 - 5.0 Vp-p (high impedance)
0.5 Vrms
SERIAL EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) RS-232C COMPATIBLE
SPEAKERS (6 ) 16W [8 W + 8 W] (10 % THD)
Accessories Supplied
Remote Control Transmitter N2QAYB000178
Batteries 2 × R6 Size
Fixing band TMME203 × 1
Dimensions (W × H × D) 1,020 mm × 610 mm × 89 mm 1,210 mm × 724 mm × 95 mm
Mass (weight)
main unit only approx. 25.0 kg net approx. 34.0 kg net
with speakers approx. 29.0 kg approx. 38.0 kg
Note: Design and specifications are subject to change without notice. Mass and dimensions shown are
approximate.