Advanced
19
Manual tuning
Search down/up
Store
Programme down/up
Return
Exit
1
STR F
-
/ + / TV / AV
Manual tuning (Front panel)
-
, + : Search
TV / AV : Move cursor
STR : To store
F : To exit
5. 5MHz
1
5. 5MHz
•
Editing and Setting Channels
Select the programme number
and search through the channel
If the sound is weak or distorted, change the sound system used for a programme channel. (5.5MHz / 6.5MHz)
Select the channel you want to adjust Set this function
If the image is strange, change the colour system to the correct transmition signal being received. (Auto / PAL /
NTSC 4.43 / NTSC 3.58)
Select the channel you want to adjust Set this function
•
Normally, select "Auto"
For the small adjustments to the tuning of an individual channel (useful for example when weather conditions are
affecting reception quality of a programme)
Select the channel you want to adjust
Set this function
•
To cancel Fine tuning, tune again by Manual tuning
For the skip programme numbers which have no tuning datas
•
This function is only effective when pressing the Programme number up or down button either on the TV unit or
on the remote control.
Select the channel you want to skip Set "Skip" to "On"
Store
Programme
number
Channel
Repeat
and
Note
•
If a VCR is
connected with
only the RF
cable, select
programme
number "0".
•
The programme
number blinks.
To freely change settings after Auto setup
(Press repeatedly until "Tuning mode" appears)
or (Access Tuning menu)
(Press repeatedly until "Manual tuning" is reached)
or (Access Manual tuning)
(Programme, Channel (not displayed), Sound system)
or
(Change programme, Start searching channels, Change sound system)
(Store)
-
(Repeat)
For Manual tuning, using the buttons on the unit
("Tuning mode" on p. 7)
■
To return to TV
Programme number
(fl ash)
Channel
Sound system
(fl ash)
•
Not available when Child lock in Setup menu is set
(p. 16).
search
select
To Next Page
Loading...
