Panasonic TH-42PV600AZ

FAQs, etc.
37
SD Card: On screen messages
Message Meaning/Action
•
SD Card: On screen messages
•
Frequently Asked Questions
Cautions in handling SD Card :
•
Do not remove the card while the unit is accessing data ("blue" LED
On) (this can damage card or unit).
•
Do not touch the pins on the back of the card.
•
Do not subject the card to a high pressure or impact.
•
Insert the card in the correct direction (otherwise, card may be
damaged).
•
Electrical interference, static electricity, or erroneous operation may
damage the data or card.
•
Back up the recorded data at regular intervals in case of deteriorated
or damaged data or erratic operation of the unit. (Panasonic is not
liable for any deterioration or damage of recorded data.)
Blue LED
WARNING: As with an small object,
SD card can be swallowed by young
children. Do not allow children to
handle SD card. Please remove SD card
immediately after use.
Is SD Card in?
SD Card is locked
Please unlock to operate
This fi le is locked
Please unlock to operate
This type of format is not
supported
This type of card is not
supported
Broken fi le
Cannot display image
Memory full
Not enough memory
Cannot read fi le
Unrecordable source
SD recording is stopped
Error
Check card
Card recording in progress
Please stop recording to operate
•
Insert a SD card.
•
Unlock the SD card.
•
Unlock the fi le in the card.
•
The unit does not support the format.
(For the applicable formats and data, see p. 34.)
•
A card not supported by the unit has been inserted.
(For the supported cards, see p. 34.)
•
The fi le is broken.
•
The card memory is full.
•
The card does not have enough memory to operate.
•
The fi le is not readable.
•
That channel cannot be recorded. (Recording is automatically
stopped.)
•
Re-insert the card. If the error persists, format
the card. (p. 25)
•
That operation is not available during recording.
To continue the operation, stop recording.
(
For example, changing channels while recording a TV
programme.
)
Delete fi le?
•
Displayed when you press Red colour button to delete a
MPEG4 fi le. Press OK button to confi rm deleting.