Panasonic TH-42PV8DA - Disassembly and Assembly Instructions; Removing Rear Cover and P-Board; Removing Rear Terminal Cover

19
7 Disassembly and Assembly Instructions
Caution:
Exchange printed circuit board after confirm parts number.
7.1. Remove the rear cover
1. See Service Hint (Section 3)
7.2. Remove the P-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (P2, P6, P7, P9, P11, P12 and
P25).
3. Remove the screws (×10 ) and remove the P-Board.
7.3. Remove the rear terminal cover
1. Remove the screws (×2 , ×2 ).
2. Remove the rear terminal cover.
Parts No. Parts name & Description Remarks
TH-42PV8D/H/HM/M/MR/MS/
MT
TH-42PV8DA/HA/HMA/MA/
MRA/MSA/MTA
TZTNP01RWTM TZTNP01BUUM CIRCUIT BOARD A PAVCSG DA/HA/HMA/MA/
MRA/MTA
TZTNP01RWTQ TZTNP01BUUQ CIRCUIT BOARD A PAVCSG MSA
LSEP1260MTHB LSEP1260WTHB CIRCUIT BOARD P PAVCSG DA/HA/HMA/MTA
LSEP1260MMHB LSEP1260WMHB CIRCUIT BOARD P PAVCSG MA/MRA/MSA
TXNC11RRTM TXNC11BDUM CIRCUIT BOARD C1 PAVCSG
TXNC21RRTM TXNC21BDUM CIRCUIT BOARD C2 PAVCSG
TXNSC1RRTM TXNSC1BDUM CIRCUIT BOARD SC PAVCSG
TXNSS1RRTM TXNSS1BDUM CIRCUIT BOARD SS PAVCSG