Why can't I use the [Controller ID function] function on my Panasonic TH-43LFE8W Monitor?
To use the [Controller ID function] on your Panasonic Monitor, ensure that [Controller ID function] is set to [On], or switch is set to . When [Controller ID function] is set to [On], you need to set switch to and set the ID number.
Why do the edges of the images flicker on my Panasonic Monitor?
The edges of the images may appear to flicker in the fast-moving parts of the images due to the characteristics of the system used to drive the panel. This is normal and not indicative of malfunctioning.
Why are there red, blue, green, and black spots on my Panasonic TH-43LFE8W Monitor's screen?
The presence of red, blue, green, or black spots on the screen is a characteristic of liquid crystal panels and is not a problem. The liquid crystal panel is built with very high precision technology giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as fixed points of red, blue, green, or black. This does not affect the performance of your LCD.
To Next Page
General