TH-50PF20E / TH-50PF20ER
7.1.2. Power LED Blinking timing chart
1. Subject
Information of LED Blinking timing chart.
2. Contents
When an abnormality has occurred to the unit, the protection circuit operates and resets to the stand by mode. At this time,
the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit.
Refer to 7.1.1 Display Indication
About blinking LED
[When blinking four times] Lighting up
=?<
—
Щ Щ Щ
ш m
i T T t
1st blink 2nd blink 3rd blink 4th blink K
I Pause for 3.5 seconds ✓
One cycle ^
u
18
To Next Page
Loading...
