TH-50PF20E / TH-50PF20ER
9.8. Removal of P-Board
1. Disconnect the connectors (P2, P6, P7 P9, P11, P25,
P35).
2. Remove 9 screws and then remove P-Board.
3. Remove 2 screws (A) and then remove H3-Board.
9.9. Removal of AC Inlet Assy
1. Disconnect the connector (P9).
2. Remove 2 screws (♦) and then remove the AC Cord
Clamper A.
3. Remove 1 screw ({}) and then remove the AC Inlet Assy.
9.10. Removal of H3-Board
1. Disconnect the connector (H37).
2. Remove 1 screw and then remove the Speaker Terminal
Block (H3-Board).
9.11. Removal of SU-Board and SD-
Board
1. Remove the Speaker Terminal Block.
(Refer to Removal of Speaker Terminal Block)
2. Remove the flexible cables from the connectors (SU1,
SU2, SU3, SU4, SU5, SU11, SD1, SD2, SD3, SD4, SD5,
SD11).
24
To Next Page
Loading...
