TH-50PF20E / TH-50PF20ER
3. Disconnect the connectors (SU41, SD42, SD46).
4. Remove 3 screws (♦).
5. Remove 4 screws (o) and then remove SU-Board and
SD-Board.
Note: when fixing SU-Board and SD-Board
• Screw on 2 screws (1) firstly.
9.12. Removal of SC-Board
1. Disconnect the connectors (SC2, SU41, SD42, SD46).
2. Remove the flexible cable from the connector (SC20).
3. Remove 7 screws (♦).
4. Remove 4 screws (o) and then remove SC-Board.
1. Disconnect the connectors (A8, A9, A10, A11, A13, A22,
A25, A35, PB32, PB33, PB34).
2. Remove the flexible cables from the connectors (A1, A20,
A31, A32).
3. Remove 3 screws (♦).
4. Remove 2 screws (o) and then remove the A-Board
Block.
9.13. Removal of SS-Board
Note: when fixing A-Board Block
• Put the flexible Cable between the Fixed Metal and A
Board when Connect the flexible Cable to the connector
(A1).
5. Disconnect the connectors (SS11, SS24, SS33).
6. Remove the flexible cables from the connectors (SS53,
SS56).
7. Remove 6 screws and then remove SS-Board.
25
To Next Page
Loading...
