TH-50PF20E / TH-50PF20ER
9.14. Removal of SS2-Board
1. Remove the A-Board Block.
(Refer to remove of SS-Board).
2. Disconnect the connector (SS24).
3. Remove the flexible cables from the connector (SS58).
4. Remove 2 screws and then remove SS-Board.
Flexible Cables
9.15. Removal of C1-Board
1. Remove the Speaker Terminal Block.
(Refer to remove of Speaker Terminal Block).
2. Disconnect the connectors (SD42, SD46).
3. Remove the flexible cable from the connector (SD11).
4. Remove 2 screws (♦).
5. Remove 2 screws (ft) and then turn over SD-Board to the
left.
Note:
Do not damage the Flexible Cables of SD-Board, and
the parts on SC-Board.
Flexible
Note: when fixing SD-Board
• Screw on 1 screw (1) firstly.
6. Remove the flexible cable from the connector (C10).
7. Remove 8 screws (♦) and then remove the flexible
cables from the connectors (CB1, CB2, СВЗ, CB4).
8. Remove 4 screws (ft) and then remove C1-Board.
Flexible Cable
9.16. Removal of C2-Board
1. Remove the Fan Block.
(Refer to remove of Fan).
2. Remove the Slot Block.
(Refer to remove of Slot Block).
3. Remove 5 screws and then remove the Hanger Assy R
and the Stand Pole Bracket Assy (R).
4. Remove the flexible cables from the connectors (C20,
C21, C26).
5. Remove 8 screws (♦) and then remove the flexible
cables from the connectors (CB5, CB6, CB7, CB8).
6. Remove 4 screws (ft) and then remove C2-Board.
26
To Next Page
Loading...
