TH-50PF20E / TH-50PF20ER
1. Remove the Fan Block.
(Refer to remove of Fan).
2. Remove the Slot Block.
(Refer to remove of Slot Block).
3. Remove the A-Board Block.
(Refer to remove of SS-Board).
4. Remove 5 screws and then remove the Hanger Assy L
and the Stand Pole Bracket Assy (L).
9.17. Removal of C3-Board
5. Disconnect the connectors (C33, C35).
6. Remove the flexible cables from the connectors (C31,
C36).
7. Remove 14 screws (■#■) and then remove the flexible
cables from the connectors (CB9, CB10, CB11, CB12,
CB13, CB14, CB15).
8. Remove 5 screws (*) and then remove C3-Board.
9.18. Removal of S1-Board
1. Remove 2 screws (B) and then remove the S1-Board
Block.
2. Disconnect the connector (S35).
3. Remove 1 screw (C) and then remove S1-Board.
9.19. Removal of Front Glass, V1,
V2-Board and Cabinet Assy
1. Remove the Speaker Terminal Block.
(Refer to remove of Speaker Terminal Block).
2. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
3. Disconnect the connectors (A11, A22).
4. Remove 4 screws (♦) and then remove the Handle Fixing
Metal (L, R).
5. Remove 5 screws (O).
Note: when fixing Handle Fixing Metal (L, R)
• Screw on 2 screws (1) firstly.
6. Pull the bottom of the Plasma Display Panel forward
(arrow1).
7. Slide the Plasma Display Panel and then remove the
Plasma Display Panel (arrow2).
Cabinet Block
27
To Next Page
Loading...
