TH-50PF20E / TH-50PF20ER
9.19.1. Notice when Front Glass or Cabinet
Assy is exchanged
Please use the Aluminum Tapes when you exchange the Front
Glass or the Cabinet Assy.
Paste the Aluminum Tapes to original position.
Note: when fixing Fixed Angle (upper-rear, bottom-
rear)
• Firstly screw on 6 screws (1-2) in order.
Note: when Front Glass is exchanged
• Paste the Front Glass Sponges in order along each
Fixed Angles left and right, upper and bottom.
Note
• The sponges are parts which cannot be recycled. Please
use the new article when you exchange the Front Glass.
9.19.3. Removal of V1-Board and V2-Board
1. Remove the Front Glass.
(Refer to remove of Front Glass).
2. Remove the Fixed Angle (bottom-front).
Side View of Fixed Angles
i
0-3mm, , Г
ШЩ
1
.
Fixed Angle
(upper-rear) ^
----------
, Fixed Anale
(upper-front)
J
9.19.2. Removal of Front Glass
1. Remove 24 screws (♦) and 1 screw (o) and then remove
the Fixed Angle (left, right, upper-rear, bottom-rear).
2. Remove the Front Glass.
©
*
д-1Д
*
©
* 0 *
©
4 4
j]^_
Г
~ Г
j
■ J
Fixed Angle
(upper-rear)
г
- Fixed Angle
(right)
1 Front Glass 1
Fixed Angle-------
(left) ^
Fixed Angle
(bottom-rear)
- 14 - " ЗА ■ nhai:
t t t t t t t t
© © ©
28
To Next Page
Loading...
