TH-50PF20E / TH-50PF20ER
3. Remove 2 screws (D).
4. Disconnect the connector (V11).
5. Remove 1 hook and then remove V1-Board
6. Remove 2 hooks and then remove the Power Button
Shield.
7. Remove 3 hooks and then remove the Power Button and
Power Button Spring.
8. Disconnect the connector (V22) and then remove V2-
Board.
9. Remove 2 hooks and then remove the 5 Key Button from
V2-Board.
9.19.4. Removal of Cabinet Assy
1. Remove the Front Glass.
(Refer to Removal of Front Glass)
2. Remove V1-Board and V2-Board.
(Refer to Removal of V1-Board and V2-Board)
3. Remove the LED Panel and Remote Sensor Panel.
4. Remove the Rear Cover Hook (Left, Right).
5. Remove the Fixed Angle (upper-front).
6. Remove the Cabinet Assy.
9.20. Removal of Plasma Display
Panel
The C1,C2,C3 Boards are connected with the plasma dis
play panel for the repair.
1. Disconnect the Fan Relay Connectors.
2. Remove 2 screws and then remove the Fan Block.
3. Disconnect the connectors (DS13, P9).
4. Remove the flexible cable from the connector (DS1).
5. Remove 4 screws and then remove the Slot Block.
29
To Next Page
Loading...
