How to prevent image retention on Panasonic Monitor?
To prevent image retention on your Panasonic Monitor, avoid displaying still pictures for extended periods. Displaying a still picture for a long time can cause a permanent image retention.
Why is my Panasonic TH-50PH10BK remote control not working?
If the remote control for your Panasonic Monitor isn't working, the batteries may be discharged or not inserted correctly; check them. Also, make sure the remote control sensor isn't exposed to bright light, like outdoor light or strong fluorescent light. Finally, confirm you're using the correct remote designed for your unit, as other remotes won't work.
Why is there no sound on my Panasonic Plasma TV?
There might be several reasons for the lack of sound on your Panasonic Plasma TV. First, ensure the TV is properly plugged into the AC outlet. Then, check if the unit is switched on by pressing the power switch or the stand-by button on the remote control. Finally, verify that the mute function on the remote control hasn't been activated.
How to fix no sound on my Panasonic TH-50PH10BK?
If there is no sound on your Panasonic Monitor, it might be because the mute function has been activated on the remote control. Check the remote to see if the mute function is on and deactivate it.
Why does brightness change in 4:3 mode on my Panasonic Plasma TV?
The change in brightness on both sides of images in the 4:3 mode on your Panasonic Plasma TV is normal and depends on the kind of program shown.
Why do the edges of images flicker on my Panasonic Plasma TV?
The flickering edges of images on your Panasonic Plasma TV are normal due to the characteristics of the system used to drive the panel.
Why does it take long for the picture to appear on Panasonic Plasma TV?
The delay in the picture appearing on your Panasonic Plasma TV happens as the unit digitally processes signals.
Why does my Panasonic Plasma TV screen darken with bright, still images?
The slight darkening of the screen on your Panasonic Plasma TV when bright pictures with minimal movements are shown is normal and not indicative of malfunctioning.
Why are there missing image areas when I zoom on my Panasonic Plasma TV?
When using the zoom function on your Panasonic Plasma TV, understand that blank areas separated from images may occur with certain video software programs.
Why does my Panasonic Plasma TV make cracking sounds?
The cracking sound sometimes heard from the Panasonic Plasma TV is the sound of the cabinet undergoing very slight contractions in response to changes in the room temperature.
General| Screen Size | 50 inches |
|---|---|
| Display Type | Plasma |
| Viewing Angle | 160 degrees |
| Aspect Ratio | 16:9 |
| Resolution | 1366 x 768 |
| Input Terminals | DVI-D, VGA, Component, Composite |
To Next Page
