EasyManua.ls Logo

Panasonic TH-50PH10UKA - Specifications

Panasonic TH-50PH10UKA
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
49
Speci cations
TH-42PH10UKA
Power Source 110 - 127 V AC, 50 / 60 Hz
Power Consumption
Power on 380 W
Stand-by condition Save OFF 0.7 W, Save ON 0.5 W
Power off condition 0.2 W
Plasma Display panel Drive method : AC type 42-inch,
16:9 aspect ratio
Screen size
36.3” (922 mm) (W) × 20.4” (518 mm) (H)
× 42” (1,057 mm) (diagonal)
(No.of pixels) 786,432 (1,024 (W) × 768 (H))
[3,072 × 768 dots]
Operating condition
Temperature 32 °F - 104 °F (0 °C - 40 °C)
Humidity 20 % - 80 %
Applicable signals
Scanning format 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 50i · 24p · 25p
· 30p · 24sF ···· SMPTE274M, 1250 (1080) / 50i
PC signals VGA, SVGA, XGA
SXGA, UXGA ···· (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
HDMI A-B TYPE A Connector × 2
COMPONENT/RGB IN Y/G (BNC) with/sync 1.0 Vp-p (75 Ω)
P
B/B (BNC), PR/R (BNC) 0.7 Vp-p (75 Ω)
AUDIO IN (RCA PIN JACK × 2) 0.5 Vrms (high impedance)
PC IN (HIGH-DENSITY MINI D-SUB 15PIN) Y or G with/sync 1.0 Vp-p (75 Ω)
Y or G without/sync 0.7 Vp-p (75 Ω)
B/P
B/CB: 0.7 Vp-p (75 Ω)
R/P
R/CR: 0.7 Vp-p (75 Ω)
HD/VD: 1.0 - 5.0 Vp-p (high impedance)
AUDIO IN (M3 JACK) 0.5 Vrms (high impedance)
SERIAL EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) RS-232C COMPATIBLE
SPEAKERS (6 Ω) 16W [8 W + 8 W] (10 % THD)
Accessories Supplied
Remote Control Transmitter
EUR7636070R
Batteries 2 × AA Size
Fixing bands TMME203 × 2
Dimensions (W × H × D) 40.2” (1,020 mm) × 24” (610 mm) × 3.5” (89 mm)
Mass (weight)
main unit only approx. 57.3 lbs
with speakers approx. 66.1 lbs
Note:
Design and speci cations are subject to change without notice. Mass and dimensions shown are approximate.

Related product manuals