Panasonic TH-50PH30E - Removal of SS-Board; Removal of C1-Board

23
TH-50PH30E / TH-50PH30ER
3. Remove 6 screws and then remove SN-Board.
8.10. Removal of SS-Board
1. Disconnect the connectors (A8, A11, A16, A22, A31).
2. Remove the flexible cables from the connector (A5).
3. Remove 2 screws ( ).
4. Remove 2 screws ( ) and then remove the A-Board
Block.
Note: when fixing A-Board Block
• Put the flexible Cable between the Fixed Metal and A-
Board when Connect the flexible Cable to the connector
(A5).
5. Disconnect the connectors (SS3, SS11).
6. Remove the flexible cables from the connectors (SS23,
SS52, SS55).
7. Remove 3 screws and then remove SS-Board.
8.11. Removal of C1-Board
1. Remove the Fan Block.
(Refer to remove of Fan).
2. Remove the Speaker Terminal Block.
(Refer to remove of Speaker Terminal Block).
3. Disconnect the connector (P9).
4. Remove 2 screws ( ) and then remove the AC Inlet
Block Block.
5. Remove 5 screws and then remove the Hanger Metal R
and the Stand Pole Bracket Assy (R).
6. Remove the flexible cables from the connectors (C10,
C11).
7. Remove 8 screws ( ) and then remove the flexible
cables from the connectors (CB1, CB2, CB3, CB4).