7.7. Lead of Wiring (7)
1. Make wire dressing as if illustrated below.
Keep moderate slack in wires not give any stress to the connectors.
2. Fix a barrier to a glass holder bottom ass’y by a screw.
Handle a barrier not to protrude from the back end of a bottom shield.
Torque of the screw THEL035N should be 80 to 120 N
cm.
Screws of THEL035N are not reuseble.
26
TH-50PV500A / TH-50PV500H / TH-50PV500M
To Next Page
Loading...
