10.2. Initialization Pulse Adjust
1. Input a Cross hatch signal.
2. Set the picture controls: -
Picture mode: Normal
White balance: Cool
Adjust the indicated test point for the specified wave form.
Test point Volume Level Remark
T1 TPSC1 (SC) --- 20 ± 15µ Sec
T2 TPSC1 (SC) VR6602 (SC) 155 ± 10µ Sec
37
TH-50PV500A / TH-50PV500H / TH-50PV500M
To Next Page
Loading...
