7.3. Lead of Wiring (3)
MAKE WIRE DRESSING AS IF ILLUSTRATED BELOW.
NOTES:
1. CONNECT CONNECTORS SURELY.
2. KEEP MODERATE SLACK IN WIRES NOT TO GIVE ANY STRESS TO CONNECTORS.
3. MANAGE THE WIRES THAT ARE AROUND ELECTRIC FAN ASSEMBLIES NOT TO TOUCH A BLADE OF ELECTRIC
FAN NOR EDGE OF FAN MOUNT METAL.
4. PLACE A SAG OF P10 WIRE IN THE TOP SIDE OF P-PCB.
22
TH-50PV500E / TH-50PV500B
To Next Page
Loading...
