7.4. Lead of Wiring (4)
MAKE WIRE DORESSING AS IF ILLUSTRATED BELOW.
NOTES:
1. CONNECT CONNECTORS SURELY.
2. KEEP MODERATE SLACK IN WIRES NOT TO GIVE ANY STRESS TO CONNECTORS.
3. MANAGE THE WIRES THAT ARE AROUND THE ELECTRIC FAN ASSEMBLIES NOT TO TOUCH A BLADE OF
ELECTRIC FAN NOR EDGE OF A FAN MOUNT METAL.
4. MANAGE WIRES NOT TO PRESS THE MC701 OF P-PCB WITH THEM.
5. PASS THE SS11 WIRE AND THE SS12 WIRE BETWEEN A M8 BOSS AND P-PCB, MANAGE THEM TO KEEP AWAY
FROM A M8 BOSS.
6. PAY ATTENTION NOT TO GIVE ANY LOAD TO THE MC701 OF P-PCB.
23
TH-50PV500E / TH-50PV500B
To Next Page
Loading...
