9 Service Mode Function
MPU controls the functions switching for each IICs through IIC bus in this chassis. The following setting and adjustment can be
adjusted by remote control in Service Mode.
9.1. How to enter SERVICE 1
1. In sound menu, set BASS to MAXIMUM, and set TREBLE to MINIMUM.
2. Simultaneously press INDEX button on remote control and DOWN button [
]ontheTVset.
9.2. How to enter SERVICE 2
1. Set the channel to CH99.
2. Select the Txt 05V Blue.
3. Press HOLD button on remote control.
Note:
To exit to Service mode, press EXIT or Power button on remote control.
31
TH-50PV500E / TH-50PV500B
To Next Page
Loading...
