TH-L32X50D
25
8 Measurements and Adjustments
8.1. Voltage chart of A-board
Set A-Board to a dummy set and check the satisfaction with the specified voltage as following table.
8.2. Voltage chart of P-board
Set IP-Board to a dummy set and check the satisfaction with the specified voltage as following table.
Power Supply Name Measurement Point Specification (V)
SUB1.8V TP8700 1.74 - 1.90
SUB1.2V TP8100 1.18 - 1.32
SUB3.3V TP8701 3.19 - 3.46
SUB5V TP8702 4.95 - 5.25
STB5V TP5400 4.9 - 5.1
SUB1.5V TP8101 1.4 - 1.6
VOLTAGE TEST POINT
Specification
Operate STBY
5.8V TP7507 6.2 ± 0.5 V 5.6 ± 0.3 V
15.6V TP7508 15.6 ± 0.8 V -
40V TP7501 40 ± 4V -
To Next Page
Loading...
