EN19EN18
Faucets that require an optional accessory to install the product
With the following kinds of faucets, an optional accessory is required to install the product.
Purchase the optional accessory from your dealer.
Large faucets
Diameter of faucet end: 24 mm to 32 mm
Optional accessory
Large-diameter Installation Adaptor (P. EN47)
Model No.: WTK7205X7378
For details on installation, read carefully through the
instructions that accompany the accessory.
Faucets onto which the product cannot be installed
Bear in mind that it will not be possible to install the product onto custom designed faucets or faucets
with the wrong thread diameter (which is not 22 mm) or wrong pipe diameter in addition to what is
shown below. Neither is it possible to install the product if the main unit comes into contact with the
faucet.
Plastic faucets
Installation will cause the plastic area at the end of the
faucet to crack.
Plastic
• The product can be
installed onto faucets
with a metal thread.
Faucets with a shower nozzle
Faucets whose end area measures 10 mm or less
10 mm or less
Faucets with a sensor
Installation 3
Checking the Faucet (continued)
TK-CJ600_CJ300_EXZ.indb 18-19 2022/01/05 15:32:26
To Next Page
Loading...
