Panasonic TK-CJ600 - Steps to Take Before Operation

EN23EN22
English
Faucets with an inside thread (thread diameter: 24 mm)
Important ⿟Do not use a tool to tighten up the nut.
(Doing so may damage the nut.)
⿟Please store any unused parts instead of disposing of
them.
(They may be used when relocating or replacing the
faucet.)
1
Remove the aerator.
Inside thread
Aerator
(Do not use.)
2
Remove the nut and adaptor.
Nut
Adaptor
(with gasket)
Main unit
gasket
Filter
⿟Do not remove
Upon completion of installation, check that the main unit does not easily rotate and that there is no
play.
3
Attach the nut and adaptor.
Screw in the bushing.
Insert into the adaptor.
Bushing
(accessory)
Gasket
Adaptor
4
Turn the nut manually, and
tighten it securely.
Fully
tighten by
hand
■
Ifitisdifculttoturn
Turn the water purier instead.
Hold the
nut
Accessories used
Bushing
(with gasket)
Installation 4
InstallingtheWaterPurier(continued)
TK-CJ600_CJ300_EXZ.indb 22-23 2022/01/05 15:32:27