12
Touchscreen
A standard user needs to perform the calibration as an administrator before performing the calibration for each user.
Calibration by an administrator
NOTE
z At first, log on to Windows as an administrator, and perform this calibration.
1 Run [Tablet Calibration].
Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet Calibration].
2 Using the stylus, touch each of the “+” target marks one by one.
3 Click [OK].
Calibration by a standard user
NOTE
z Perform the following calibration for each user.
1 Run [Tablet Calibration].
Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet Calibration].
2 Using the stylus, touch each of the “+” target marks one by one, and then click [OK].
z Perform the calibration for the orientation to be used.
3 Click [OK].
Touchscreen Calibration
To Next Page
Loading...
