131
Troubleshooting (Advanced)
*6
Windows XP: standby
Touch Pad / Touchscreen (only for model with touchscreen)
The cursor does not work. z Connect the external mouse correctly.
z Restart the computer using the keyboard.
Press and press Î
2 times, and press Ï to select [Restart] and press
Enter
.
Press ,
U
, and
R
to select [Restart].
z If the computer does not respond to keyboard commands, read “No response.”
(Î page 137).
Cannot input using the touch pad. z Set [Touch Pad] to [Enabled] in the [Main] menu of the Setup Utility
(Î page 96).
z The touch pad may be disabled by some mouse drivers. Check your mouse’s
operating instructions.
<Only for model with touchscreen>
Cannot point the correct position using
the included stylus.
z Perform the touchscreen calibration (Î page 12).
<Only for model with touchscreen>
Cannot input using the touchscreen
z Set [Touchscreen Mode] to [Auto] or [Tablet] in the [Main] menu of the Setup
Utility (Î page 96).
Cannot use scroll function of touch
pad on Internet Explorer.
z Use Touchscreen.
z Move the mouse cursor to outside of Internet Explorer, and return to Internet
Explorer.
Cannot use horizontal scroll function
of touchpad on Adobe Reader.
z Make sure [Scroll Configuration] of the touchpad.
Click (Start)
*6
- [Control Panel] - [Mouse] - [Touch Pad], and add a check
mark for [IntelliMouse Wheel mode] in [Scroll Configuration].
To Next Page
Loading...
