27
1 Power off your computer ( "Starting Up/Shutting Down")
Do not shut down using the suspend* or hibernation mode.
* With Windows 98, the "Suspend" is called "Standby".
2 Connect the printer to your computer
3 Turn on the printer, then turn on your computer with the
LCD panel opened
4 Setting your printer
Go to [My Computer] - [Printers]. Find your printer’s icon, double-click
on it, and click [File] - [Set As Default]. If no icon is available, select [Add
Printer] and then follow the on-screen instructions.
Parallel Port
Using a Printer
NOTE
You may need to install a driver for your printer. Simply follow the
on-screen instructions and refer to the operation manual of the
printer on how to install the driver.
Confirm whether or not the setting for the [Parallel Port] in the
Setup Utility is optimal. ( page 38)
To Next Page
Loading...
