34
CAUTION
Hard Disk Drive
To change your hard disk drive, contact Panasonic Technical Support
To customers:
To change your hard disk, contact Panasonic Technical Support.
Be sure to back up all important data before the change.
If [Hard Disk Lock] is set to [Enable] in the Setup Utility, change this to [Disable]
before the change.
To technicians (at Panasonic Technical Support):
Be careful when replacing the hard disk. The hard disk is extremely sensitive to
shock. In addition, static electricity could later affect some internal components.
Installing/Removing the hard disk
(For technicians at Panasonic Technical Support)
Hard Disk
4 Removing/Installing the hard disk
Pull the tab of hard disk according to the arrow, and slightly lift the
hard disk drive.
1 Power off your computer ( "Starting Up/Shutting Down")
Do not shut down using the suspend* or hibernation mode.
2 Open the display
Slide the latch located at the front and lift open the display.
Latch
Cover
3 Open the cover
Insert a thin, flat object, like a ruler into the open slot on the left side
of the computer to release a lock.
2
Open the cover.
Open Slot
Tab
2
2
* With Windows 98, the "Suspend" is called "Standby".
(To next page)
To Next Page
Loading...
