131
Modem
NOTE
Do not enter
sleep/ standby or hibernation during communications.
To remove the cable, press and hold the lever and pull out.
The computer automatically resumes from sleep/ standby when the telephone connected to the
modem rings.
You will need software to keep the computer in an idle state waiting for a phone call, and if you prefer, to turn the computer to
sleep/ standby again afterward. For further information, refer to the instruction manual of the software
application.
To enable this function
1 Click (Start) - [Windows Fax and Scan].
2 Click [Tools] - [Fax Settings].
A standard user needs to enter an administrator password.
Check whether the modem you are using is displayed in Device name. If not, click [Select fax device] and select
the correct modem.
3 Add a check mark for [Allow the device to receive fax calls] and click [OK].
4 Click (Start) - [Computer] - [System properties] - [Device Manager].
A standard user needs to enter an administrator password.
5 Double-click [Modems], and then double-click the internal modem.
6 Click [Power Management] and add a check mark for [Allow this device to wake the
computer], and then click [OK].
Ring Resume Function
Windows 7
Windows XP
Windows 7
Windows XP
Windows 7
Windows XP
Windows 7
To Next Page
Loading...
