52
USB Devices
To connect the device
1 Connect the USB device to one of the USB ports (A).
For further information, refer to the instruction manual of the USB device.
To remove the device
Preparation
z Close all applications.
1 Disable the USB device.
A Double-click on the notification area and select the USB device, then select [Stop].
B Follow the on-screen instructions.
z This step is not necessary when;
• Removing the device after turning off the computer.
• is not displayed.
• The device does not appear in the list in step A.
2 Remove the USB device.
CAUTION
z Do not remove a USB device while your computer is in the standby or hibernation.
z Save important data and close all applications.
NOTE
z You may need to install the driver for the USB device. Follow the on-screen instructions or refer to the instruction man-
ual of USB device.
z You may need to install the driver again when connecting the device to another port.
z When a USB device is connected, standby and hibernation may not function normally. If the computer does not start
up normally, remove the USB device and restart the computer.
z Some devices will not operate when connected to a USB HUB; These devices must be connected directly to the USB
port on your computer.
Connecting/Removing USB Devices
To Next Page
Loading...
