- 99 -
Add New Channels
You can add any new channels found automatically to channel list.
1. The signal condition is displayed and press OK to access.
●
If you select Any Satellite in Auto Setup, this step is skipped.
●
It takes a while to check the connection for your selected satellite.
●
Ensure that the Signal Lock status is shown as Locked. If it is not
locked, the search cannot be executed.
●
If the status is shown as Not locked and Signal Quality / Signal
Strength have no indications, please check the dish alignment.
2. Select the search mode with
/ and press OK to start Add New
Channels.
●
New channels can only be added to the existing channel list from the
same satellite.
To Next Page
Loading...
