28
How to Use Menu Functions
Menu list■
Menu
Item Adjustments / Configurations (alternatives)
Setup
Off Timer
Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Link Settings
VIERA Link
Sets to use VIERA Link functions (Off / On) (p. 65)
Q-Link
Selects which AV terminal is to be used for data communication between this TV and a
compatible recorder (AV1 / AV2) (p. 64)
Select the connected terminal to the recorder even it is not compatible with Q-Link.
●
AV1 / AV2 out
Chooses the signal to be transmitted from the TV to Q-Link
(TV / AV1 / AV2 / AV3 / Monitor)
Monitor: Image displayed on screen
●
Component, PC and HDMI signals cannot be outputted.●
Power on Link
Sets to use Power on Link function (Off / On) (p. 64 and p. 65)
Power off Link
Sets to use Power off Link function (Off / On) (p. 64 and p. 65)
Standby Power
Save
Controls the power consumption in Standby mode of the connected equipment to
reduce the consumption (Off / On) (p. 66)
This function is available when “VIERA Link” is set to “On” and “Power off Link” is set
●
to “On”.
Intelligent Auto
Standby
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption (Off / On (With reminder) / On (No reminder)) (p. 66)
This function is available when “VIERA Link” is set to “On”.
●
Download
Downloads channel, language, country / region settings to a Q-Link or VIERA Link
compatible equipment connected to the TV
DVB-S and DVB-C channel settings cannot be downloaded.
●
Network Setup
Sets the network setting to use in your network environment (p. 52)
DivX® VOD
Displays DivX VOD registration code (p. 56)
Child Lock
Locks a channel / AV input to prevent access to it (p. 42)
DVB-S Tuning Menu
Favourites Edit
Creates list of favourite DVB-S channels (p. 37)
Channel List
Skips the unwanted DVB-S channels or edits DVB-S channels (p. 37)
Auto Setup
Automatically sets the DVB-S channels received in the area (p. 32)
Manual Tuning
Sets the DVB-S channels manually (p. 38)
Update Channel
List
Updates DVB-S Channel List with keeping your settings (p. 38)
Signal Condition
Checks the DVB-S signal condition (p. 39)
Antenna System
Sets the antenna system to use plural LNBs for receiving several satellites (p. 33)
This TV supports DiSEqC Version 1.0.
●
LNB Configuration
Selects the satellite for each LNB (p. 33)
Add DVB-C
Channels
Retunes all TV channels to add DVB-C channels
All the previous tuning settings are erased.
●
Use this function if DVB-C services supply.●
To Next Page
Loading...
