4
Please read these Instructions completely BEFORE installing any optional
accessories. Installing the additional board, or connector with the power ON
could damage the SC, and/or other board(s).
How to turn OFF the Power:
1. Disconnect the Telephone Line Cable.
2. Disconnect the LAN/USB Cable(s),
if connected.
3. Unplug the AC Power Cord.
<Reference>
(There is a remote possibility of electrocution when servicing the unit during a Lightning
Storm. As a precaution, disconnect the Telephone Line Cable first, before unplugging
the AC Power Cord.)
* The specifications are subject to change without notice. Panasonic Communications Co., Ltd. reserves
the right to make improvements in the product design without reservation and without notice.
Important NoticeImportant Notice
Unplug
AC Power Cord
POWER
(Some models may have
the Power Switch.)
To Next Page
Loading...
