?
Transferring Calls
Unscreened Transfers
Note: This feature requires system programming or a specific
DBS configuration, and may not be available. For information,
see your system administrator or DBS dealer.
In an unscreened transfer, you do not announce the call to the
person receiving the transfer. The call simply rings at the
phone to which it is transferred.
. .
1. During a call, press HOLD.
2. Dial the extension number to which the call will be
transferred.
3. Do one of the following (ask your dealer or system
administrator which is appropriate):
l
Replace the handset or press ON/OFF, or
l
Press PROG and then replace the handset or press
ON/OFF.
Holdinn Calls
Holding Calls
Putting a Call on Hold
Press HOLD during a call.
If the call is on an outside line, retrieve the call by pressing the
appropriate line key. (The line key will be flashing green.)
If the call is an extension, retrieve it by presshrg HOLD a
second time.
Answering Two Calls
1. Press HOLD to put the fist call on hold.
2. Press the green flashing FF key for the second call.
3. Press HOLD to put the second call on hold.
4. Press the green flashirlg FF key to return to the first call.
Notes:
l
If you do not pick up a held call in a certain period of
time, you wilt hear a tone hrdicating that the call is still
waiung.
l
The EXT indicator flashes when you hold an internal call
or an outside line that is not assigned to an FP key.
34 4. Answering Calls
4 . Answering Calls
31
To Next Page
Loading...
