requentiy Asked Questions (FAQ)
18
Why doesn't the Remote
Control work?
Why is there no picture or just
a blue, black or snowy screen
being displayed?
Why is the screen blank and the '_ _I_
power indicator blinking?
i H0w do Idisplay eHELP(built-in Manual) ? / _IP
Check that the batteries are fresh, are of the same type and are
installed with the correct polarity (+ & -).
Cable or Satellite boxes or operating non-Panasonic Blu-ray
players, use the remote supplied with the device•
_'_ Check if the power cord is plugged in and the TV is turned on ifioni•"f
red LED light should be on, not blinking).
® Press the INPUT button on the remote to select the correct inputsource.
/i ®" Ensure all connections are correct and secure•
l: ¢ When us ng externa v deo source, such as a Cab e/Sate te box or DVD
/i player, check that the device is on and functioning correctly.
/ ® Press MENU on the TV's remote control If the menu is displayed
• • • ,
\.,,,,.,_,,,!hg,n t he. TV !_Swov.rk_.!,ng [echec k abo ve steps:,, ...........................................................................................,:_
/_® The TV has gone nto shutdown mode to protect tse f Try unp ugg ng t for a /
few minutes and connecting it again, tf there was a temporary power surge
on the AC tine it may now be OK. If the blinking returns, call 1-877-95-VlERA l
/.,,_..,.,...!U.S.A. r 1-8o.,. 66/3 30/O014/C anada!.:.........................................................................._l
Care an
Cleaning
First, unplug the Power cord plug from the wall outlet.
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-
free cloth.
@ If the surface is particularly dirty, after cleaning up the dust, soak a soft, lint-free cloth in diluted mild liquid dish soap (1 part mild
liquid dish soap diluted by 100 times the amount of water), and then wring the cloth to remove excess liquid. Use this cloth to
wipe the surface of the display panel, then wipe it evenly with a dry cloth of the same type until the surface is dry.
® Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile
substances such as insect sprays, solvents, and thinner; otherwise, the quality of the surface may be adversely affected.
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
® If the cabinet is particularly dirty, soak the cloth in diluted mild liquid dish soap and then wring the cloth dry. Use this cloth to
wipe the cabinet and then wipe it dry with a dry cloth.
@ Do not allow any mild liquid dish soap to come into direct contact with the surface of the LCD TV.
If water droplets get inside the unit, operating problems may result.
® Avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the cabinet surface
may be adversely affected or the coating may peel off.
® Do not let articles made from rubber or PVC be in contact with the TV for long periods of time.
® Cleaning
Wipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to which a small
amount of mild liquid dish soap has been added and then wipe with a dry cloth.
Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surface coating.
(If using a chemically-treated cloth, follow the instructions supplied with the cloth.)
® Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-term contact with
rubber, vinyl products, or the like. (Doing so will cause deterioration.)
Wipe the plug with a dry cloth at regular intervals. (Moisture and dust can lead to fire or electrical shock.)
I Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we disclaimany liability or damage arising from operation and/or performance from usage of such other maker's peripheral devices.
To Next Page
Loading...
