The TV automatically goes into Standby after the selected period.
II Press SLEEP repeatedly until the desired time appears.
SLEEP
• It is also possible to set the time from "Sleep Timer" in the "Setup" menu
(p. 28).
• To cancel, set to "Off" or turn off the TV.
• Off/15/30/60/90 (minutes) • When the remaining time is within 3 minutes, the remaining time will be
displayed on screen.
Watchin contentfrom
With the connected equipment turned On
Display the Input select menu
externaldevices
Select the input mode
(example)
0_select
or Press INPUT repeatedly to cycle through the available inputs.
_2_enter
Label
(example)
@You can label or skip each input mode
--> Input Labels (p. 24)
• Skipped inputs will be grayed out when the INPUT button is
pressed.
@During the selection, if no action is taken for several seconds,
the "Input select" menu disappears.
@The terminal and label (names) of the connected equipment
are displayed.
Operate the connected equipment directly or Use the remote control
supplied with the equipment
@For details, see the manual for the connected equipment.
16
To Next Page
Loading...
