attach To remove
Insert it firmly until the Keep pushing both
tabs on both sides click sides until they snap
into place, and pull.
Hook
Close
Note the correct polarity
(+ or -).
Open
( Caution
_ Incorrect installation may cause
battery leakage and corrosion,
resulting in damage to the remote
control.
*_,Do not mix old and new batteries.
** Do not mix different battery types (such
as alkaline and manganese batteries).
** Do not use rechargeable (Ni-Cd)
batteries.
_ Do not burn or break batteries.
Be sure to attach the provided ferrite core to the HDMI cabie/USB cable (not supplied) to reduce interference or electrical
noise.
Attach the ferrite core as close as
possible to connector on the TV side as
shown.
Close the ferrite core until it clicks,
÷
®
>
o
o
O0
03
o
Co
0
©
>
o
o
U)
©
-2
(example: USB connecter)
9
To Next Page
Loading...
