EasyManua.ls Logo

Panasonic Viera TC-P42X5

Panasonic Viera TC-P42X5
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
You can enjoy your Home theater by connecting a Dolby Digital (5.1 channel) decoder and "Multi Channel" amplifier to the
DIGITALAUDIO OUT terminals.
( Caution
® Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disable optical output.
® When an ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When an NTSC
channel is selected, the output will be PCM.
® When playing a movie on SD Card Movie player, when the sound has been recorded in Dolby Digital, the output from the
DIGITAL AUDIO OUT terminal will be Dolby Digital. When the sound is recorded in other formats, the output will be PCM.
® For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3;
characters might be cut off).
e The CC can be displayed on the TV only when the receiver (such as a Cable box or satellite receiver) has the CC set
to ON within the device itself. Check with your Cable or Satellite provider for instructions. The TV's CC button does not
operate the Satellite or Cable box's CC function.
e If the CC is set to On on both the receiver and TV when the signal is 48@ (except for the HDMI connection), the CC
may overlap on the TV.
® If a digital program is being output in analog format, the CC data will also be output in analog format.
e If the recorder or output monitor is connected to the TV, the CC needs to be set up on the recorder or output monitor.
Do not display a picture in 4:3 mode for an extended period, as this can cause
"Image retention" to remain on either or both sides of the display field.
To reduce the risk of such "Image retention", change the brightness of the side
bars.
See page 26 for more information
e_The side bar may flash (alternate black/white) depending on the picture.
Side Bar
4:3 i
Screen i_
Display _
Applicable input signal for Component (Y, PB, PR), HDMI
®0 . -
525 (480)/60i 15.73 59.94
525 (480)t60p 31:47 ' 59_94
750 (720)/60p 45.00 59.94
1,125 (t;080)t60i i 33_75 59_94
1,125 (1,080)/60p 67.43 59.94
1,125 (t ,080)t60p ' 67:50 " 60.00
1,125 (1,080)/24p* 26.97 23.98
1,125 (1 ;080)t24p* ' 27:00 24_00
(* HDMI only)
® Signals other than those shown above may not be displayed properly.
® The above signals are reformatted for optimal viewing on your display.
Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we ]
disclaim any liability or damage arising from operation and/or performance from usage of such other maker's peripheral
1
devices.
32

Table of Contents

Related product manuals