Why is there no sound coming
from the TV?
Why is the sound unusual,
distorted, low volume or in
another language?
Why is there a clicking, ticking or
buzzing sound coming from the
TV unit?
What is the easiest and best way
to connect a High-Definition Cable t
or Satellite box to the TV?
Why does the CC button not
display Closed Caption?
® Make sure the volume is up and MUTE is off.
Confirm the TV set to ON MENU and
speakers
are
by pressing
selecting "Audio" --> "TV speakers".
® Check that the correct SAP (Secondary Audio Program) is
selected by pressing the SAP button on the remote control.
(p. 14)
® If the TV is connected to a Home Theater via optical cable,
then: Check the connection, the audio system is on, the
correct input is selected.
_,,,v..v.®Check "HDMI 1 in" or "HDMI 2 in" analog/digital audio settings.
S'@' Check that the correct SAP (Secondary Audio Program) is
se ected by press ng the SAP button on the remote centre I
/ _;_ Check that all connections of external equipment connected to t
the TV are secure.
_ _# When using Cable or Satellite box, check the device's audio
settings. (Example: try changing the box's Audio Range to
,._. 'narrow')
When TV power is turned on or shut off, there are electrical ""/
components that make a c ck sound Th s s norma operat on
. . .
@ Changes tn the temperature and humld_ty of the room may
. , i
cause thermal expansion and contractton that can produce l
.....
sounds. This is not a sign of faulty operation or a malfunction.
Use an HDMI cable. It carries both digital video and audio
signal in HD. HDMI cable is the only cable needed to connect
an HD device to the TV.
The ma_n unit radiates heat and some of the parts may /
become hot. This is normal operation and does not affect the /i
of the set.performance
_ Ensure good vent at on
. .
,_ Do not block the ventilation holes of the TV and do not place ;
Check that the batteries are fresh, are of the same type and
are installed with the correct polarity (+ & -).
using Cable, or Satellite boxes, or operating non-Panasonic
use the remote sup_ with the device.
®
db
r-
CD
3>
co
d_
c_.
_D
t-
o
o0
p,
D
options are not available. For example, Zoom adjustments are
only available when the FORMAT is changed to zoom mode.
In the main menu, select "Setup". Highlight "Reset to defaults"
and press OK. Enter your password (if created earlier) or
create a temporary new password. Select Yes to reset the TV.
35
To Next Page
Loading...
