Using Network Services (DLNA / VIERA Connect / freesat)
96
Menu
Item Adjustments / Configurations (alternatives)
Slideshow Settings
Transition Effect
Selects the transition effect for switching the photo during the slideshow
[Off] / [Fade] / [Slide] / [Dissolve] / [Motion] / [Random]
[Fade]: The next photo fades in gradually.
[Slide]: The next photo slides and appears from the left side.
[Dissolve]: Each photo is dissolved when switching to the next photo.
[Motion]: Each photo is displayed with an effect of enlarging, reducing, moving
up or moving down.
[Random]: Each transition is selected at random.
Interval
Selects slideshow interval [5] / [10] / [15] / [30] / [60] / [90] / [120] (seconds)
This function is not available when [Transition Effect] is set to [Motion].
Repeat Slideshow repeat [Off] / [On]
Back Ground Music
Selects the back ground music during Photo mode
[Off] / [Type1] / [Type2] / [Type3] / [Type4] / [Type5]
Video Setup
Video Preview
Sets to start the preview of the title or scene in the thumbnail screen [Off] / [On]
Image may not be displayed for an instant in the thumbnail screen. Set the
preview [Off] to resolve this.
Multi Audio,
Monaural Audio,
Dual Mono
Audio
Selects between selectable sound tracks (if available)
It may take several seconds to change the sound.
Only available during playback
Subtitle
Subtitles On / Off (if available)
Only available during playback
Subtitle Text
Selects the font type to display subtitles correctly (if available)
Only available during playback
Subtitle Language
Selects the language in which subtitles should appear (if available)
Only available during playback
Aspect Change
[Aspect1]: Displays the content enlarged without distortion.
[Aspect2]: Displays the content full-screen.
[Original]: Displays the content original size.
You can also change the aspect using the ASPECT button.
Aspect change may not work depending on the content.
Only available during playback
Repeat Playback repeat within the selected file [Off] / [On]
Music Setup
Repeat
Playback repeat [Off] / [Folder] / [One]
[Folder]: Playback repeat within the selected folder.
[One]: Playback repeat of the selected one file.
Audio output settings (for video contents)
You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT or HDMI2 (ARC function)
terminal.
To confirm or change the current sound status (see above)
1 Display the menu and Select [Sound]
Sound
select
access
2 Select [SPDIF Selection] and set
2/2
SPDIF Selection
Reset to Defaults
Auto
Reset
select
access / store
Menu
Item Adjustments / Configurations (alternatives)
Sound
SPDIF Selection
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
and HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output as
Dolby Digital Bitstream. DTS is output as DTS. MPEG is output as PCM.
[PCM]: Digital output signal is fixed to PCM.
To Next Page
Loading...
