Panasonic Viera TX-L42WT50E - Page 45

How to Use Menu Functions
45
Menu Item Adjustments / Configurations (alternatives)
Sound
SPDIF Delay
Adjusts the delay time of the sound output from DIGITAL AUDIO OUT and HDMI2
(ARC function) terminals if the sound does not synchronise the image

For DVB mode
Reset to Defaults
Press the OK button to reset the current Sound Mode, [Balance], [Headphone
Volume] and [Surround] to the default settings
Network
Connection Test,
Network Connection,
Wireless Network
Settings, IP/DNS
Settings
Sets the network setting to use in your network environment (p. 89, 90)
Network Link Settings Sets to control the TV with the devices connected to the network (p. 88)
Software Update Checks for available software updates from the Panasonic website
New Software Message
Selects whether to give a notification message when new software is found via
network [Off] / [On]
Network Status Displays the network status (MAC Address, current network settings, etc.)
Timer
Timer Programming
Sets a timer to record or remind forthcoming programmes (p. 58)

For DVB mode
Off Timer
Sets the duration of time until the TV automatically goes into Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 23)
Auto Standby
Sets the duration of time that the TV will remain on when no operation is
performed [Off] / [2] / [4] (hours)

Starting Timer Programming automatically does not affect this function.

Automatic input switching with the connected equipment affects this function
and time-count will be reset.

The notification message will appear 3 minutes before going into Standby mode.
Setup
Eco Navigation
Automatically sets the TV to the most suitable energy-saving mode

If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],
[Power Save] [On]
[Intelligent Auto Standby] [On (No reminder)]
[Auto Standby] [2 hours]
[Front Logo LED]
[Off]
Recording Setup Settings for the recording feature of the USB HDD / SD Card (p. 71)
Bluetooth Setup Settings for the specific devices supporting Bluetooth wireless technology (p. 113)
VIERA Touch Pad Controller
Pairing
Registers the VIERA Touch Pad Controller (supplied) to this TV

Only 1 touch pad controller can be registered.
Cursor Settings Sets for the cursor of the touch pad controller