How to Use Menu Functions
46
Menu
Item Adjustments / Configurations (alternatives)
Setup
Link Settings
VIERA Link Sets to use VIERA Link functions [Off] / [On] (p. 99)
HDMI Content Type
Automatically adjusts the picture settings according to the received HDMI content
via HDMI cable [Off] / [Auto]
This function is available if the connected equipment supports HDMI Content
Type.
The content type information will be displayed for several seconds when this
function works.
AV1 out
Chooses the signal to be transmitted from the TV to Q-Link
[TV] / [AV2] / [Monitor]
[Monitor]: Image displayed on screen
Component and HDMI signals cannot be output.
Power on Link Sets to use Power on Link function [Off] / [On] (p. 98, 99)
Power off Link Sets to use Power off Link function [Off] / [On] (p. 98, 99)
Standby Power
Save
Controls the connected equipment to reduce power consumption in Standby
[Off] / [On] (p. 100)
This function is available when [VIERA Link] is set to [On] and [Power off Link]
is set to [On].
Intelligent Auto
Standby
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption
[Off] / [On (With reminder)] / [On (No reminder)] (p. 100)
This function is available when [VIERA Link] is set to [On].
Download
Downloads channel, language and country / region settings to Q-Link or
VIERA Link compatible equipment connected to the TV
DVB-S and DVB-C channel settings cannot be downloaded.
Child Lock Applies access control for channels or inputs to prevent unwanted access (p. 61)
Tuning Menu
Favourites Edit
Creates a list of favourite channels (p. 54)
Not valid on Analogue mode
Channel List Skips the unwanted channels or edits channels (p. 55)
Auto Setup Automatically searches for the receivable channels (p. 50 - 53)
Manual Tuning Searches for the channels manually (p. 56)
Update Channel
List
Updates the channel list while keeping your settings (p. 57)
For DVB mode
Favourite Network
Selects your favourite network for each broadcasters (only available in some
countries)
For DVB-C or DVB-T mode
New Channel
Message
Selects whether to give a notification message when a new channel is found
[Off] / [On] (p. 57)
For DVB mode
To Next Page
Loading...
