USB HDD / SD Card Recording
73
To start One Touch Recording
Start
No other channel can be selected while the
recording is in progress.
When both USB HDD and SD Card are available
Select the recording device
USB HDD1
Please select recording device
EXIT
Select
RETURN
OK
SD Card
select
set
To stop recording on the way
or
To play back or delete the recorded contents “Recorded TV mode” (p. 81)
Even if One Touch Recording is in progress, you can play back all the contents. (Depending on the USB HDD / SD
Card, it may not be available or the recording may not work properly while playback.)
Record constantly [REW LIVE TV]
(USB HDD only)
Records the current programme constantly.
Confirm the code of the remote control is “73” (p. 31).
Select [Auto] to start [REW LIVE TV]
Recording Setup
REW LIVE TV Auto
select
access / store
When you select [Auto], the recording will
start automatically.
This recording will not start if the other
recording is in progress, TV signal condition
is bad or any images are not displayed.
To operate [REW LIVE TV]
To pause
To search backward (up to 90 minutes)
After pausing or searching backward, the following buttons are available to operate.
Search backward
Playback / Pause
Return to the current programme
Search forward
Search backward /
forward
Pause /
Playback
Playback
Return to the
current programme
To stop [REW LIVE TV]
REW LIVE TV
Recording Setup
Off
Auto
select [Off]
If you stop [REW LIVE TV], the recorded
content for [REW LIVE TV] will be deleted.
[REW LIVE TV] will be stopped and the recorded content deleted automatically in the following conditions:
(Even if [REW LIVE TV] stops for the following conditions, as long as the setting is [Auto], the new recording will start
automatically in a condition that makes the recording available.)
Selected other channels
Selected locked channel
Selected invalid channel
No TV signal
When the other recording starts
When the TV is turned to Standby or off
To Next Page
Loading...
