9.1 Registering extension
monitors
Extension monitors can be registered to the main
monitor.
9.1.1 Registering extension monitors
1 Main monitor:
Press M N ® select “Register/Cancel” ®
.
2 Select “Register” ®
.
R When you are prompted to register your main
monitor, select “Main monitor” ® .
3 Select the registration number of the extension
monitor to be registered ®
.
4 Extension monitor:
Press M N ® select “Register/Cancel” ®
.
5 Select “Register” ® .
R When you are prompted to register your
extension monitor, select “Extension
monitor” ®
® .
6 Select the registration number of the extension
monitor to be registered ® .
R Make
sure to select the same registration number
that was selected on the main monitor.
R Registration is complete when the extension
monitor restarts.
7 Main monitor:
Press M
N.
9.2 Cancelling devices
1 M
N ®
select “Register/Cancel” ®
.
2 Select “Cancel” ® .
3 Select the device to cancel
*1
®
*1
®
.
R A beep sounds and “Cancel completed” is
displayed.
*1
Not displayed when using as an extension monitor.
Note:
R When you want to change an extension monitor's
registration number or re-register an extension
monitor, first use the extension monitor to cancel
itself, and then re-register it again as an extension
monitor. (Extension monitors become main monitors
again when they are cancelled.)
24
9. . Expanding the system
9. Expanding the system
To Next Page
Loading...
