This section explains the basic operations of the VL-V900 lobby station (Video Intercom System for Apartment
Complexes) when used with the VL-MWD272 main monitor.
6.1 Controls
6.1.1 Lobby station
A Heat sensor
Turns on the display when a visitor is detected.
B Lens cover
C Light
Illuminates subjects in dark environments.
D Display
E Keypad
F Speaker
G Camera lens
H Microphone
I
Search buttons (
and )
Used to select items shown on the display.
J
Cancel button (
)
K
Call button ( )
6.2 Lobby station operations
6.2.1 Calling a resident
Entering a room number
1. Enter the resident’s room number.
2. Press M N to call.
Searching by first letter of the name
1. Press M
N.
2. Use the keypad to enter the first letter of the
resident’s name.
R Press a key repeatedly to scroll through the
letters assigned to that key.
R Note the hints displayed at the bottom of the
screen.
3. Press M N or M N to search for the desired name.
4. Press M N to call.
Searching through all names
1. Press M N.
2. Press M N or M N to search for the desired name.
3. Press M N to call.
Switching the image displayed on the main monitor
While talking to the main monitor, press M#N to switch the
image displayed on the main monitor from the lobby
station to the camera. To return to the lobby image, press
M N.
6.2.2 Calling a receptionist
1 Press M N.
2 Press M N or M N to search for the receptionist.
3 Press M N to call.
6.2.3 Opening the door by entering an unlock
code
1 Press M#N.
2 Enter the 4-digit unlock code.
3 Press M
N.
14
6. . VL-V900 basic operations
6. VL-V900 basic operations
To Next Page
Loading...
