Panasonic VL-SWD272 - 3. Preparation; 3.1 Controls Overview

3.4 Charging the sub monitor
Only connect the charger with the supplied Panasonic
AC adaptor (page 2).
AC adaptor connections
A
*1
B
*1 Press plug firmly.
R Connect the charger to the power outlet, and then
place the sub monitor in the charger to charge it.
Charging usually takes about 8 hours.
A Charge indicator
– when charging: lights
– when charging is completed: off
B Hook
Note:
R The sub monitor does not overcharge even if it is
continuously placed in the charger.
R When the sub monitor is off the charger or the AC
adaptor is disconnected for 1 week or more, remove
the batteries in order to maintain battery performance
and prevent the batteries from discharging.
3.5 Setting the language, date and
time
R The play lamp lights if these settings are not
configured.
1 Press the M N button to turn on the display.
2 Press or to select the desired
language.
3 Press .
4 Press again.
5 Set the date and time.
R Press
to select an item (i.e., year, month,
day, etc.).
R Press or to change the setting.
6 When finished, press .
Note:
R The date and time settings may be deleted when
there is a power outage. In this case, reconfigure the
settings.
R The time may become out of sync over time (about
60 seconds per month).
10
3. Preparation