Panasonic VL-SWD272 - 4.4 Talking with Other Devices

7.1 Specifications
Main monitor (VL-MWD272)
Power source 220-240 V AC, 50/60 Hz
Power
consumption
Standby: approx. 2.5 W
During operation: approx. 10 W
Dimensions
(mm) (height ´
width ´ depth)
Approx. 158´243´29.5
(excluding protruding sections)
Mass (weight) R VL-MWD272BX:
approx. 825 g
R VL-MWD272CX/ML:
approx. 875 g
R VL-MWD272AZ:
approx. 835 g
Operating
environment
Ambient temperature: approx.
0 °C to +40 °C
Relative humidity
(non-condensing): up to 90 %
Display Approx. 17.8 cm (7.0 inches
wide colour display)
Talking method Hands-free
Installation
method
Wall mount (mounting bracket
supplied)
Frequency
range
1.88 GHz to 1.90 GHz
RF transmission
power
250 mW (max.)
Doorphone (VL-V522L)
Power source Power supplied by the main
monitor
Dimensions
(mm) (height ´
width ´ depth)
Approx. 131´99´36.5
(excluding protruding sections)
Mass (weight) Approx. 200 g
Operating
environment
Ambient temperature: approx.
-15 °C to +55 °C
Relative humidity
(non-condensing): up to 90 %
Viewing angle Horizontally: approx. 87°
Vertically: approx. 66°
Installation
method
Wall mount (mounting base
supplied)
Minimum
illuminance
required
1 lx
(within approx. 50 cm from the
camera lens)
Lighting method LED lights
Sub monitor (VL-WD613)
n Main body
Power source
Rechargeable Ni-MH (AAA ´ 2)
Dimensions
(mm) (height ´
width ´ depth)
Approx. 173´52´30
(excluding protruding sections)
Mass (weight) Approx. 160 g (including the
batteries)
Operating
environment
Ambient temperature: approx.
0 °C to +40 °C
Relative humidity
(non-condensing): up to 90 %
Display Approx. 5.6 cm (2.2 inches,
colour display)
Frequency
range
1.88 GHz to 1.90 GHz
RF transmission
power
250 mW (max.)
Talking method Hands-free
Operating time
*1
Standby use: approx. 80 hours
Charging time
*2
Approx. 8 hours
Transmitting
range
Approx. 100 m (line-of-sight
distance from the main monitor)
*1 When used fully charged in an operating
temperature of 20 °C.
*2 When the operating temperature is 20 °C. The
charging time may increase when the operating
temperature is lower than this.
n Charger
Power source AC adaptor (PNLV226)
5.5 V DC, 0.5 A
Power
consumption
Standby: approx. 0.4 W
(when the sub monitor is not
placed in the charger)
During charging: approx. 1.4 W
Dimensions
(mm) (height ´
width ´ depth)
Approx. 43´81´76
(excluding protruding sections)
Mass (weight) Approx. 70 g (excluding the AC
adaptor)
Operating
environment
Ambient temperature: approx.
0 °C to +40 °C
Relative humidity
(non-condensing): up to 90 %
16
7. . Specifications
7. Specifications