8.5 Sub monitor - function settings list
You can change the settings to match how the sub monitor is used.
1 From the information screen press .
2 Select the desired item ® .
R Repeat this step as necessary to navigate to the desired setting.
3 Select the desired setting ® .
4 Press M
N.
Note:
R If
you do not perform any operations for 60 seconds while changing these settings, or if an incoming call is received,
the setting is cancelled and the screen turns off.
R In the following table, default settings are indicated by < >.
Sub-menu
Settings
1 2
Ringtone
Doorphone 1
<Sound 1>, Sound 2, Sound 3,
Sound 4
<Normal>,
Repeat
Doorphone 2
Sound 1, <Sound 2>, Sound 3,
Sound 4
<Normal>,
Repeat
Key sound – <On>, Off
Contrast – The contrast can be adjusted to 5 different levels (default
setting:
level 3) by pressing
. When it is difficult to see the
monitor display, adjust the contrast as necessary.
Register – Yes, No
Initialize – Yes, No
R The sub monitor remains registered to the main monitor
even if its settings are initialized. (The registration
information is not deleted.)
25
8. Additional functions
To Next Page
Loading...
