Panasonic VL-SWD272 - 12. VL-V900 Basic Operations; 12.1 Controls Overview; 12.2 Lobby Station Operations

This section explains the basic operations of the VL-V900 lobby station (Video Intercom System for Apartment
Complexes) when used with the VL
-MWD272 main monitor.
12.1 Controls
12.1.1 Lobby station
G
H
I
J
K
A
C
B
D
E
F
A Heat sensor
Turns on the display when a visitor is detected.
B Lens cover
C Light
Illuminates subjects in dark environments.
D Display
E Keypad
F Speaker
G Camera lens
H Microphone
I
Search buttons (
and )
Used to select items shown on the display.
J
Cancel button (
)
K
Call button ( )
12.2 Lobby station operations
12.2.1 Calling a resident
Entering a room number
1. Enter the resident’s room number.
2. Press M N to call.
Searching by first letter of the name
1. Press M N.
2. Use the keypad to enter the first letter of the resident’s name.
R Press a key repeatedly to scroll through the letters assigned to that key.
R Note the hints displayed at the bottom of the screen.
3. Press M N or M N to search for the desired name.
4. Press M N to call.
Searching through all names
1. Press M N.
2. Press M N or M N to search for the desired name.
3. Press M N to call.
Switching the image displayed on the main monitor
While
talking to the main monitor, press M#N to switch the image displayed on the main monitor from the lobby station
to the camera. To return to the lobby image, press M
N.
12.2.2 Calling a receptionist
1 Press M N.
2 Press M
N or M N to search for the receptionist.
35
12. . VL-V900 basic operations
12. VL-V900 basic operations