Panasonic VL-V566BX - Programming; Adjusting Ringer Volume

Programming
18
Adjusting the ringer volume
You can adjust the ringer volume heard when receiving calls from the door station by using the main monitor
station during standby. (3 levels and “OFF” are available.)
{MENU}
{TALK/OFF}
{PLAY}
{MONITOR}
1 Press {MENU}, then select “RING/ANSWERING SETTINGS”
by pressing {MENU} (
▲
SELECT).
FUNCTION SETTINGS
TIME AND DATE SETTINGS
RING/ANSWERING SETTINGS
RECORDING/PLAY SETTINGS
2 Press {MONITOR} (OK), then select “RING VOLUME” by
pressing {MENU} (
▲
SELECT).
RING/ANSWERING SETTINGS
RING VOLUME
RING TONE
3 Press {MONITOR} (OK), then select the desired volume by
pressing {MENU} (
▲
SELECT).
RING VOLUME
●
HIGH
MEDIUM
LOW
OFF
Current
setting
4 Press {MONITOR} (OK).
L“r” moves to the selected item.
5 To end the operation, press {TALK/OFF}.
Note:
LYou can also adjust the ringer volume while receiving a call.
1 Press {MENU}, then select “RING VOLUME” by pressing {MENU} (
▲
SELECT).
RING VOLUME
2 Press {MONITOR} (-) or {PLAY} (+).*
1
*
1
To turn off the ringer volume for calls from the door station, press and hold {MONITOR} (-) until 2 short
beeps sound.
–
To turn the ringer on, press {PLAY} (+).
SV30BXOI.indb18SV30BXOI.indb18 2010/10/2217:21:472010/10/2217:21:47