21 
User
Weekly timer setting
Promotes energy saving by allowing you to set up to 6
programmes in any given day.
Indicates the next timer operation
programme
Day to be selected
Indicates the next timer
operation day
Programme number in a day
OFF Timer
ON Timer
Lights up if Timer operation is selected
1
sserP
 to enter the timer setting mode.
2
sserP
 or  to select your desired day.
3
sserP
 to confirm your selection.
4
sserp,gniknilbeblliw”1“
 to set
programme 1.
5
 Press
 to select ON or OFF timer.
6
sserP
 or  to select your desired time.
You can set
,  ,  and the Water
Temperature Thermo Shift setting.
7
sserP
 to confirm programme 1. The selected
day will be highlighted with ▼.
• After 2 seconds, the display will move to the
next programme. Repeat steps 4 to 7 to set
programmes 2 to 6.
• During timer setup, if no button is pressed within
30 seconds, or if the
 is pressed, the setting at
that moment is confirmed and timer setup is ended.
To check current timer programme
1
sserP
 to enter timer mode and press
to enter day setting.
2
sserP
 or  until your desired day is shown,
press
 to confirm your selection.
3
sserP
 or  to check the set programmes.
To modify current timer programme
or add new timer programme
1
Perform steps
1
 to
7
 of “Weekly timer
setting” to modify existing timer programme, or
add any timer programme.
To cancel current timer programme
1 sserP  to enter day.
2
sserP
 or  until your desired day is shown,
press
 to enter programme setting.
3
sserP
 or  until your desired day is shown.
Press
 to cancel the programme and ▼ will
disappear.
To disable/enable Weekly Timer
• To disable weekly timer setting, press , then
press
.
• To enable previous weekly timer setting, press  ,
then press
.
Dealer
 Operation/settings to be done only by the authorised dealer/specialist.
User
 Operation/settings to be done by the authorised dealer/specialist or user.
 
 
Note:
• You may set the timer for each day of the week (Monday to Sunday) with 6 programmes per day.
• When the system is switched on by the timer, it will use the previously set temperature to control the water outle
temperature.
• The same timer programme cannot be set on the same day.
• You may also select 2 or more days with the same timer setting.